Sega / Vewlix CP CAD files

Arcade cabinet hardware and accessories
User avatar
codecrank
Posts: 466
Joined: January 9th, 2011, 7:32 pm
Location: NSA Central

Re: Sega Naomi/Net City/NAC/Blast etc CP CAD files

Post by codecrank » February 11th, 2016, 8:01 am

zumbito wrote:
Hi FRanco, all DWGs are fine now. I have tried to apply the pitch you propossed for the bolts (84.5x40.4), but just found the lower right side almost overlaps with the first botton in the second line for P1 ina a 2player six button panel. How do you work this around?


install the plates vertically. works great

Image

zumbito
Posts: 642
Joined: February 18th, 2015, 12:03 am
Location: Metro City
eBay: jaime5171

Re: Sega Naomi/Net City/NAC/Blast etc CP CAD files

Post by zumbito » February 11th, 2016, 8:12 am

Hahah, yes, figured that out :D Thanks!

Geky
Posts: 10
Joined: January 26th, 2018, 12:12 pm
Location: Vicenza, Italy
eBay: geky983

Re: Sega Naomi/Net City/NAC/Blast etc CP CAD files

Post by Geky » January 26th, 2018, 6:53 pm

Thankyou so much FrancoB, you're my hero!!! I'm restoring a Naomi universal cabinet and i want to change the panel from 2 players with 3 buttons each to 6 buttons per players! :D

User avatar
FrancoB
J+ member of the year finalist!
Posts: 4567
Joined: June 8th, 2009, 10:42 pm
Location: Buckinghamshire
eBay: francosquashking
Initials: FRN

Re: Sega Naomi/Net City/NAC/Blast etc CP CAD files

Post by FrancoB » January 26th, 2018, 7:51 pm

You're most welcome :awe:

I'm just finishing modelling up a Vewlix 2L12B panel actually, once it's finished I'll upload it too. :wink: :thumbupright:

Geky
Posts: 10
Joined: January 26th, 2018, 12:12 pm
Location: Vicenza, Italy
eBay: geky983

Re: Sega Naomi/Net City/NAC/Blast etc CP CAD files

Post by Geky » January 29th, 2018, 6:50 pm

Do you also know the thickness and the material of the original naomi panel? :eh:

User avatar
FrancoB
J+ member of the year finalist!
Posts: 4567
Joined: June 8th, 2009, 10:42 pm
Location: Buckinghamshire
eBay: francosquashking
Initials: FRN

Re: Sega / Vewlix CP CAD files

Post by FrancoB » February 18th, 2018, 2:19 pm

Geky wrote:Do you also know the thickness and the material of the original naomi panel? :eh:
I'm afraid I don't have any orginal Naomi panels any more. The only Sega shape panel I have left is a Bishi Bashi panel and this is far thicker than a standard Naomi panel. Maybe someone else will be able to measure one for you.

Added:

VEWLIX CONTROL PANELS

​Modelled from a E3102171A​ 2L14B panel kindly donated by Derick2k

Vewlix_2l14B.dxf
Image

Standard 2L14B panel for use with E3018350A​ joystick brackets.


Vewlix_Mounting_Plate_E3018350A​.dxf
Image

E3018350A​ joystick brackets for use with E3102171A​ panels.


Vewlix_2L14B_V2.dxf
Image

Identical to the E3102171A​ but with a stud arrangement to a range of joysticks:

Image

Seimitsu SE - Fits: LS-32/LS-32-01, LS-34/LS-34-01, LS-40/LS-40-01.
Seimitsu SE-P40 - Fits: LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01 and LS-60
Sanwa JLF-P-1 for the JLF​


Mounting studs for the joysticks have increased to take into account the ~7mm spacers you'll need to use to achieve the correct joystick height.


I've taken as much care as possible to ensure all dimensions are correct and I've printed multiple scaled .dxfs off to confirm accuracy. I'm as confident as I can be without actually getting a panel cut and offering up overlays etc. I would appreciate feedback from anyone who gets one cut so I can update the model if required.

All Vewlix files are available [here].


I'll be adding some custom Vewlix control panel .dxfs once I've finished designing them.

User avatar
FcoBenitez
Posts: 349
Joined: August 18th, 2008, 3:31 am
Location: Chile
eBay: virtuacl
Initials: KBL

Re: Sega City CP/CPO Templates

Post by FcoBenitez » July 18th, 2018, 4:56 am

yosai wrote:Get a panel made up like this... just in case... :think:

Image

Challenge Accepted 8-)

Image
2X Sega Aero City

User avatar
yosai
280bpm's too slow
Posts: 3627
Joined: August 17th, 2008, 5:00 pm
Location: London
eBay: yosai

Re: Sega / Vewlix CP CAD files

Post by yosai » July 18th, 2018, 9:44 am

Nice one. The craftsmanship looks top notch. :lol:

User avatar
FcoBenitez
Posts: 349
Joined: August 18th, 2008, 3:31 am
Location: Chile
eBay: virtuacl
Initials: KBL

Re: Sega / Vewlix CP CAD files

Post by FcoBenitez » December 24th, 2018, 11:40 pm

A few guys have asked me about the Sega Aero City control panel file, so here it is:

https://www.mediafire.com/file/315371uu ... l.DXF/file

If possible, FrancoB could add it to his collections.
Enjoy 8-)
2X Sega Aero City

Legorrion
Posts: 2
Joined: November 15th, 2018, 6:23 pm
Location: Rosario
eBay: Legorrion
Initials: ADF

Re: Sega / Vewlix CP CAD files

Post by Legorrion » December 26th, 2018, 2:29 pm

FcoBenitez wrote:
December 24th, 2018, 11:40 MP
A few guys have asked me about the Sega Aero City control panel file, so here it is:

https://www.mediafire.com/file/315371uu ... l.DXF/file

If possible, FrancoB could add it to his collections.
Enjoy 8-)
Thanks!!!!!! :D :D

User avatar
penrhos
Panel Beater
Posts: 1461
Joined: September 11th, 2008, 12:08 pm
Location: Leicester - UK
eBay: ngpd002

Re: Sega / Vewlix CP CAD files

Post by penrhos » February 9th, 2019, 11:54 am

Going to get a batch of the vewlix V2 made. Has anyone else made any using the file and do Taito's overlays fit?

Also measuring my panels they are 1.5mm thick + overlay giving almost 2mm total thickness.
2 * Vewlix-F, 1 * Sega Rally 3, 1 * Chewlix, 2 * Euro 25", Kash Kong Pusher, TAB V-Pin.

Hackcell
Posts: 9
Joined: November 18th, 2018, 5:26 pm
Location: Costa Rica
eBay: jaczeld
Initials: DJV

Re: Sega / Vewlix CP CAD files

Post by Hackcell » March 20th, 2019, 3:45 pm

following :)

User avatar
penrhos
Panel Beater
Posts: 1461
Joined: September 11th, 2008, 12:08 pm
Location: Leicester - UK
eBay: ngpd002

Re: Sega / Vewlix CP CAD files

Post by penrhos » March 23rd, 2019, 8:42 am

Had a batch of the vewlix ones made and they're slightly too wide.

Bolts are in correct locations but panel could do with 1mm taking off each end.

They don't fit a chewlix at current width - bolts line up ok but they don't fit into recess as 2-3mm too wide.

I've confirmed by measuring against my F panels.
2 * Vewlix-F, 1 * Sega Rally 3, 1 * Chewlix, 2 * Euro 25", Kash Kong Pusher, TAB V-Pin.

User avatar
FrancoB
J+ member of the year finalist!
Posts: 4567
Joined: June 8th, 2009, 10:42 pm
Location: Buckinghamshire
eBay: francosquashking
Initials: FRN

Re: Sega / Vewlix CP CAD files

Post by FrancoB » March 23rd, 2019, 9:32 am

Thanks for the feedback. I've not had any made myself but I thought Derick had, I'll check with him too to see if he had issues.

Can you align the ends of the one of the repro panels and your F panel and then use a steel rule to measure the extra length of the repro panel at the other end? I can then update the models.

User avatar
dRwH0
Posts: 5
Joined: March 29th, 2019, 3:50 pm
Location: Thessaloniki
eBay: NoFeedback
Initials: DRW

Re: Sega / Vewlix CP CAD files

Post by dRwH0 » April 19th, 2019, 8:57 am

Awesome work with the panels! Really appreciate it!

Is there any DIY way to install the bolts ? I'm having a hard time finding a metal workshop here who can install these. The guy who laser-cutted my 2L12B panel said he didn't have the gear to do so.

User avatar
penrhos
Panel Beater
Posts: 1461
Joined: September 11th, 2008, 12:08 pm
Location: Leicester - UK
eBay: ngpd002

Re: Sega / Vewlix CP CAD files

Post by penrhos » April 20th, 2019, 4:59 pm

The shop that made mine plasma welded them to the back.
2 * Vewlix-F, 1 * Sega Rally 3, 1 * Chewlix, 2 * Euro 25", Kash Kong Pusher, TAB V-Pin.

User avatar
dRwH0
Posts: 5
Joined: March 29th, 2019, 3:50 pm
Location: Thessaloniki
eBay: NoFeedback
Initials: DRW

Re: Sega / Vewlix CP CAD files

Post by dRwH0 » May 3rd, 2019, 3:03 pm

penrhos wrote:
April 20th, 2019, 4:59 MP
The shop that made mine plasma welded them to the back.
I'm in the process of finding another workshop so I can have the job completed from the start.

Plasma welding then it is ... ;) Thanks

User avatar
nem
Posts: 1338
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Sega / Vewlix CP CAD files

Post by nem » May 3rd, 2019, 3:12 pm

Self clinching studs are way cheaper.

User avatar
dRwH0
Posts: 5
Joined: March 29th, 2019, 3:50 pm
Location: Thessaloniki
eBay: NoFeedback
Initials: DRW

Re: Sega / Vewlix CP CAD files

Post by dRwH0 » May 14th, 2019, 8:41 am

nem wrote:
May 3rd, 2019, 3:12 MP
Self clinching studs are way cheaper.
Is there a hand tool for those ? You still need a lot of pressure to install them.

Post Reply