R type 2, quiet sound

PCB problems and fixes
Post Reply
User avatar
thomj
Just a few screws loose
Posts: 1735
Joined: June 13th, 2010, 12:05 am
Location: East Yorkshire
Initials: TWJ

R type 2, quiet sound

Post by thomj » November 6th, 2011, 11:14 am

I've been loaned an original r type 2 pcb. The sound on it works but is quiet. The volume pot doesn't make it louder or quieter at all, but if you turn it all the way down it'll suddenly mute it.

I thought perhaps it may be a pot problem but there are some empty component spots, wanted to check nothing was missing :think:

Image

Anyone know if any of those spots should be filled?

SuperDeadite
Posts: 108
Joined: January 21st, 2010, 4:49 pm
Location: Japan
Initials: ETP
Contact:

Re: R type 2, quiet sound

Post by SuperDeadite » November 6th, 2011, 11:52 am

Don't know about R-Type 2, but my Kengo board (same pcb) looks identical to your R2. And the sound pot functions properly on mine.
Stronger then your average deadite.

User avatar
thomj
Just a few screws loose
Posts: 1735
Joined: June 13th, 2010, 12:05 am
Location: East Yorkshire
Initials: TWJ

Re: R type 2, quiet sound

Post by thomj » November 6th, 2011, 12:16 pm

I guess I should try and meter the pot then if thee don't look to be any missing bits. Thanks :)

VectorGlow
Posts: 499
Joined: November 8th, 2008, 11:40 pm
Location: Wales, UK
eBay: realflight

Re: R type 2, quiet sound

Post by VectorGlow » November 6th, 2011, 8:27 pm

First check that the boardset is getting +12 volts DC, as well as -5 volts DC.

Then check the resistance of the pot - turn the boardset off, flip it over and crank the pot all one way - check the resistance. Crank it all the other way - check resistance again. I can't remember off the top of my head what resistance value the pot is - it will be a few K though.

If that's okay then I'd personally check the electrolytic caps (the green caps) and if they check out then check the sound going INTO the amp (this can be checked with an oscilloscope or a crystal earpiece).

Please report back here with your findings. :)
Arcade game board repairer

User avatar
thomj
Just a few screws loose
Posts: 1735
Joined: June 13th, 2010, 12:05 am
Location: East Yorkshire
Initials: TWJ

Re: R type 2, quiet sound

Post by thomj » November 7th, 2011, 8:58 pm

The volume pot's dodgy. Thanks for the help.

Deadite, could you please see what the value of your volume pot is? :)

SuperDeadite
Posts: 108
Joined: January 21st, 2010, 4:49 pm
Location: Japan
Initials: ETP
Contact:

Re: R type 2, quiet sound

Post by SuperDeadite » November 8th, 2011, 12:48 pm

Sure, if you can explain what you mean exactly.. :oops:
Stronger then your average deadite.

User avatar
kernow
:problem: child
Posts: 14830
Joined: August 17th, 2008, 2:01 pm
Location: Devon
Initials: KRN
Contact:

Re: R type 2, quiet sound

Post by kernow » November 8th, 2011, 12:50 pm

thomj wrote:The volume pot's dodgy. Thanks for the help.

Deadite, could you please see what the value of your volume pot is? :)

Only a couple of quid surely at most.
David... The wind blows... The wind blows... Bits of your... life awayee

VectorGlow
Posts: 499
Joined: November 8th, 2008, 11:40 pm
Location: Wales, UK
eBay: realflight

Re: R type 2, quiet sound

Post by VectorGlow » November 8th, 2011, 12:52 pm

He means the resistance value of the pot. :)

Afraid I don't have one here to check.
Arcade game board repairer

User avatar
kernow
:problem: child
Posts: 14830
Joined: August 17th, 2008, 2:01 pm
Location: Devon
Initials: KRN
Contact:

Re: R type 2, quiet sound

Post by kernow » November 8th, 2011, 12:56 pm

VectorGlow wrote:He means the resistance value of the pot. :)

Afraid I don't have one here to check.

*sarcasm flying over head sound*
David... The wind blows... The wind blows... Bits of your... life awayee

VectorGlow
Posts: 499
Joined: November 8th, 2008, 11:40 pm
Location: Wales, UK
eBay: realflight

Re: R type 2, quiet sound

Post by VectorGlow » November 8th, 2011, 1:11 pm

kernow wrote:
VectorGlow wrote:He means the resistance value of the pot. :)

Afraid I don't have one here to check.

*sarcasm flying over head sound*
No sarcasm intended or implied - just saying. Don't get offended. :D
Arcade game board repairer

User avatar
kernow
:problem: child
Posts: 14830
Joined: August 17th, 2008, 2:01 pm
Location: Devon
Initials: KRN
Contact:

Re: R type 2, quiet sound

Post by kernow » November 8th, 2011, 1:18 pm

:wtf:

:palm:

I was joking about the value of the pot :lol:
David... The wind blows... The wind blows... Bits of your... life awayee

VectorGlow
Posts: 499
Joined: November 8th, 2008, 11:40 pm
Location: Wales, UK
eBay: realflight

Re: R type 2, quiet sound

Post by VectorGlow » November 8th, 2011, 1:20 pm

Oh, doh is me! Sorry, rushing around like a blue-arsed fly here and the brain is working on low power. ;)
Arcade game board repairer

User avatar
thomj
Just a few screws loose
Posts: 1735
Joined: June 13th, 2010, 12:05 am
Location: East Yorkshire
Initials: TWJ

Re: R type 2, quiet sound

Post by thomj » November 8th, 2011, 4:09 pm

VG descried how to meter the pot earlier in the thread :) Use a multimeter set to resistance, k ohms
VectorGlow wrote: Then check the resistance of the pot - turn the boardset off, flip it over and crank the pot all one way - check the resistance. Crank it all the other way - check resistance again. I can't remember off the top of my head what resistance value the pot is - it will be a few K though.
If you can tell me the numbers you get I can buy a pot with the same values :)

SuperDeadite
Posts: 108
Joined: January 21st, 2010, 4:49 pm
Location: Japan
Initials: ETP
Contact:

Re: R type 2, quiet sound

Post by SuperDeadite » November 9th, 2011, 4:35 pm

Ah, sadly I currently lack a proper meter to do this with. Sorry... :?
Stronger then your average deadite.

User avatar
thomj
Just a few screws loose
Posts: 1735
Joined: June 13th, 2010, 12:05 am
Location: East Yorkshire
Initials: TWJ

Re: R type 2, quiet sound

Post by thomj » November 9th, 2011, 4:45 pm

OK man. I'll find someone else. But you really NEED to get a multimeter. Doesn't need to be fancy. Mine was only £4 or something.

User avatar
kernow
:problem: child
Posts: 14830
Joined: August 17th, 2008, 2:01 pm
Location: Devon
Initials: KRN
Contact:

Re: R type 2, quiet sound

Post by kernow » November 9th, 2011, 4:51 pm

You don't need a multimeter, if you've got this far don't let the trendy squad tell you what to do :problem:
David... The wind blows... The wind blows... Bits of your... life awayee

User avatar
Jamtex
Posts: 100
Joined: May 20th, 2011, 9:10 pm
Location: Oslo, Norway

Re: R type 2, quiet sound

Post by Jamtex » November 10th, 2011, 6:25 am

Kernow : I wonder if there is any voltage going across these wires *Sticks wires to tongue, wakes up 2 hours later* Yep that was definately mains voltage. :palm: :mrgreen:
A:>

Post Reply