Monitor dying or screen burn damage?

For monitor related issues
User avatar
thechop
Not as old as Ralph
Posts: 1305
Joined: August 24th, 2008, 1:17 pm
Location: Wubbly Wolverhampton.

Monitor dying or screen burn damage?

Post by thechop » October 12th, 2008, 5:35 pm

Picked up a Naomi uni and being a dedicated Virtua tennis cab for all its life the Monitors suffering the usual screen burn-in, not a problem as it was expected and it still displays a great picture.Only thing is the press start button or whatever writing in the top left and right and bottom left and right the colours seem to be blurred, knowing it has screen burn i'm putting it down to that but could it be something else ?seems to be the 4 corners.I'm well aware its knocking on and am expecting to have to get another monitor at some point just wondering if it could be something other than the screen burn causing it.

Image
Image
kernow wrote:
Cmon chop I wanna see your manly bricklayer arms.

User avatar
grantspain
Tech Head
Posts: 4417
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Monitor dying or screen burn damage?

Post by grantspain » October 12th, 2008, 6:53 pm

have you tweeked the focus yet?

User avatar
thechop
Not as old as Ralph
Posts: 1305
Joined: August 24th, 2008, 1:17 pm
Location: Wubbly Wolverhampton.

Re: Monitor dying or screen burn damage?

Post by thechop » October 12th, 2008, 7:53 pm

grantspain wrote:have you tweeked the focus yet?
Yeah, it won't sharpen the image more than in the pic.
kernow wrote:
Cmon chop I wanna see your manly bricklayer arms.

User avatar
grantspain
Tech Head
Posts: 4417
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Monitor dying or screen burn damage?

Post by grantspain » October 12th, 2008, 8:29 pm

bring up a grid pattern and post the photo

User avatar
thechop
Not as old as Ralph
Posts: 1305
Joined: August 24th, 2008, 1:17 pm
Location: Wubbly Wolverhampton.

Re: Monitor dying or screen burn damage?

Post by thechop » October 12th, 2008, 9:18 pm

Image
kernow wrote:
Cmon chop I wanna see your manly bricklayer arms.

User avatar
grantspain
Tech Head
Posts: 4417
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Monitor dying or screen burn damage?

Post by grantspain » October 12th, 2008, 10:18 pm

check the yoke has not moved,i am hoping this is not more serious

User avatar
thechop
Not as old as Ralph
Posts: 1305
Joined: August 24th, 2008, 1:17 pm
Location: Wubbly Wolverhampton.

Re: Monitor dying or screen burn damage?

Post by thechop » October 14th, 2008, 10:18 pm

Checked the yoke and all seems nice and tight, looked at the HV adj though and it looks like its knackered i daren't touch it, its got what looks like a blob of mastic holding it together, is it easy enough to replace these type of adjustors and where would i get them from if i wanted some?
kernow wrote:
Cmon chop I wanna see your manly bricklayer arms.

User avatar
grantspain
Tech Head
Posts: 4417
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Monitor dying or screen burn damage?

Post by grantspain » October 14th, 2008, 10:24 pm

thechop wrote:Checked the yoke and all seems nice and tight, looked at the HV adj though and it looks like its knackered i daren't touch it, its got what looks like a blob of mastic holding it together, is it easy enough to replace these type of adjustors and where would i get them from if i wanted some?
are you talking about the flyback adjustments??

User avatar
thechop
Not as old as Ralph
Posts: 1305
Joined: August 24th, 2008, 1:17 pm
Location: Wubbly Wolverhampton.

Re: Monitor dying or screen burn damage?

Post by thechop » October 14th, 2008, 10:39 pm

I took the neck card off and made sure nothing was loose as poolchamp explained to me earlier, then to the right of the focus adjustor there is a screwdriver adjustable HV Adjust, i haven't touched it but it looks knackered and looks in need of replacement someones obviously fiddled with it and it looks held together with mastic i was wondering if this could be a problem and if it was easy enough to replace it could do with changing even if it doesn't affect the problem.Its the same adjustor as the R-G-B ones and all that.
kernow wrote:
Cmon chop I wanna see your manly bricklayer arms.

User avatar
grantspain
Tech Head
Posts: 4417
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Monitor dying or screen burn damage?

Post by grantspain » October 14th, 2008, 10:53 pm

what chassis is this,a nanao ms2932 or a sanwa 29es31s?
the hv adjust is probably the B+ adjust-doubt thats the problem though

is there anyone near you that can test your chassis on another tube,i can test it for you but it would need to be shipped to spain and insured

User avatar
thechop
Not as old as Ralph
Posts: 1305
Joined: August 24th, 2008, 1:17 pm
Location: Wubbly Wolverhampton.

Re: Monitor dying or screen burn damage?

Post by thechop » October 14th, 2008, 11:03 pm

Its a Sanwa chassis, no i don't think so unless someone volunteers their services if they see this.That HV thing needs replacing to be sure though i'd say its almost dropping off :o
kernow wrote:
Cmon chop I wanna see your manly bricklayer arms.

User avatar
grantspain
Tech Head
Posts: 4417
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Monitor dying or screen burn damage?

Post by grantspain » October 14th, 2008, 11:09 pm

o.k i am checking the schematics now-give me 10 minutes mate

User avatar
grantspain
Tech Head
Posts: 4417
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Monitor dying or screen burn damage?

Post by grantspain » October 14th, 2008, 11:13 pm

VR401 its a 10k pot,if its real crappy then i guess it could cause untold problems

User avatar
thechop
Not as old as Ralph
Posts: 1305
Joined: August 24th, 2008, 1:17 pm
Location: Wubbly Wolverhampton.

Re: Monitor dying or screen burn damage?

Post by thechop » October 14th, 2008, 11:15 pm

Replaceable?
kernow wrote:
Cmon chop I wanna see your manly bricklayer arms.

User avatar
grantspain
Tech Head
Posts: 4417
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Monitor dying or screen burn damage?

Post by grantspain » October 14th, 2008, 11:20 pm

yes of course,the reason it is glued is because it is factory set and should not be adjusted
you can swap it for the horizontal size pot VR455 if you want to have a look to see what happens

User avatar
thechop
Not as old as Ralph
Posts: 1305
Joined: August 24th, 2008, 1:17 pm
Location: Wubbly Wolverhampton.

Re: Monitor dying or screen burn damage?

Post by thechop » October 15th, 2008, 7:13 pm

Where would i get one from to replace it totally? any ideas?
kernow wrote:
Cmon chop I wanna see your manly bricklayer arms.

User avatar
grantspain
Tech Head
Posts: 4417
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Monitor dying or screen burn damage?

Post by grantspain » October 15th, 2008, 7:23 pm


User avatar
thechop
Not as old as Ralph
Posts: 1305
Joined: August 24th, 2008, 1:17 pm
Location: Wubbly Wolverhampton.

Re: Monitor dying or screen burn damage?

Post by thechop » October 15th, 2008, 7:30 pm

Nice one should have known Maplins would have some :oops: , thought they may be harder to find than that, is it a 10k one i need?
kernow wrote:
Cmon chop I wanna see your manly bricklayer arms.

User avatar
grantspain
Tech Head
Posts: 4417
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Monitor dying or screen burn damage?

Post by grantspain » October 15th, 2008, 7:34 pm

yes 10 k for the hv pot,well it is according to the schematics

User avatar
thechop
Not as old as Ralph
Posts: 1305
Joined: August 24th, 2008, 1:17 pm
Location: Wubbly Wolverhampton.

Re: Monitor dying or screen burn damage?

Post by thechop » October 15th, 2008, 7:50 pm

Ok nice one, thanks for that i think i'll replace that and see what happens, thanks for your help its greatly appreciated ;)
grantspain wrote:yes of course,the reason it is glued is because it is factory set and should not be adjusted
you can swap it for the horizontal size pot VR455 if you want to have a look to see what happens
If i was to replace it for the horizontal size pot VR455 would that cause any problems in itself? meaning would i then have to go replace the VR455 for another 10k anyway?
kernow wrote:
Cmon chop I wanna see your manly bricklayer arms.

Post Reply