List of caps for Nanao MS8-29?

For monitor related issues
Post Reply
buffi
Posts: 47
Joined: May 4th, 2009, 4:52 pm
Location: Sweden
Contact:

List of caps for Nanao MS8-29?

Post by buffi » September 1st, 2019, 3:17 pm

Trying to fix an issue with my MS8 (https://photos.app.goo.gl/TL7hkkStCoqu62AD9)
Looks like a recap should fix it.

When I look at this wiki:
https://wiki.arcadeotaku.com/w/Nanao_MS8-29
the description at the top states exactly what my problem is, and to
"Replace C911 C913 C442"

... but I can't find these values anywhere.

I could buy a premade cap-kit, but I'd rather just get these three if someone has a list of caps used in the chassi.

User avatar
nem
Posts: 1442
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: List of caps for Nanao MS8-29?

Post by nem » September 1st, 2019, 4:39 pm

The values are written on the caps.

buffi
Posts: 47
Joined: May 4th, 2009, 4:52 pm
Location: Sweden
Contact:

Re: List of caps for Nanao MS8-29?

Post by buffi » September 1st, 2019, 4:42 pm

nem wrote:
September 1st, 2019, 4:39 MP
The values are written on the caps.
I know, but my hope was to order them before taking out the monitor + chassi, since I won't have time to do that for a few days.

It´s quite confusing how a lot of caps mentioned on
https://wiki.arcadeotaku.com/w/Nanao_MS8-29
does not exist in this list:
https://wiki.arcadeotaku.com/w/Nanao_MS8-29FSG

More specificly:
C442, C332, C433

User avatar
nem
Posts: 1442
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: List of caps for Nanao MS8-29?

Post by nem » September 2nd, 2019, 11:29 am

MS8-29 had a bunch of revisions. That's why I wouldn't trust any list unless it included a pic of the chassis.

Anyway, since you asked:

C332 is on the neck board, it's 10uf 250V

C433 is close to the vertical deflection IC, it's 470uf 35V.

As for C442, I think it's a typo. C422 is next to C913 and C913, it's a 470uf 16V.

buffi
Posts: 47
Joined: May 4th, 2009, 4:52 pm
Location: Sweden
Contact:

Re: List of caps for Nanao MS8-29?

Post by buffi » September 2nd, 2019, 11:41 am

nem wrote:
September 2nd, 2019, 11:29 am
MS8-29 had a bunch of revisions. That's why I wouldn't trust any list unless it included a pic of the chassis.

Anyway, since you asked:

C332 is on the neck board, it's 10uf 250V

C433 is close to the vertical deflection IC, it's 470uf 35V.

As for C442, I think it's a typo. C422 is next to C913 and C913, it's a 470uf 16V.
Ah, a typo would make sense. Thanks a lot!

Post Reply