Nanao MS2932-S compatibility

For monitor related issues
Post Reply
Benimaru
Posts: 29
Joined: October 12th, 2018, 8:23 pm
Location: Germany
eBay: extension55
Initials: PDG

Nanao MS2932-S compatibility

Post by Benimaru » October 16th, 2018, 7:40 pm

I was able to obtain a nearly unused MS2932-S in superb condition.
My first idea was to replace the not-so-nice tube of my Blast City only to recognize, that the bezel doesn't match...
Which cabs are compatible to the 2932-S? It came from a F355 dedicated cab originaly, the Naomi Uni should also match, didn't it?

User avatar
mufunyo
Posts: 673
Joined: August 21st, 2008, 12:26 am
Location: Eindhoven, NL
eBay: mufunyo
Initials: MUF

Re: Nanao MS2932-S compatibility

Post by mufunyo » October 16th, 2018, 9:15 pm

Naomi should match yeah, as well as some driving cabinets afaik. Also, there's a hack possible where you mount the Sega frame in front of the tube ears which recesses the monitor ever so slightly, meaning the bezel should now fit (albeit with a gap between it and the monitor).
Image

User avatar
nem
Posts: 1298
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Nanao MS2932-S compatibility

Post by nem » October 19th, 2018, 3:24 pm

Well, you need the correct bezel for the Naomi (NOA-1502-01).

MS-2932 will also drop in place of a MS-8 / MS-9.

Benimaru
Posts: 29
Joined: October 12th, 2018, 8:23 pm
Location: Germany
eBay: extension55
Initials: PDG

Re: Nanao MS2932-S compatibility

Post by Benimaru » October 20th, 2018, 9:11 pm

Thanks for the hint!
I guess it will be a pain in the **** to track such a bezel down?

Asure
Posts: 566
Joined: April 17th, 2013, 5:16 pm
Location: Netherlands
eBay: asure_nl

Re: Nanao MS2932-S compatibility

Post by Asure » October 20th, 2018, 9:44 pm

Naomi bezel can be found, there's some around.
Blast.. not so much. Backmounting and some isolation strips black foam padding with sticky sides is probably the only way.

User avatar
nem
Posts: 1298
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Nanao MS2932-S compatibility

Post by nem » October 21st, 2018, 12:34 pm

Yeah, there's only bezel for the Blast and that fits the semi-curved (?) tubes, like the MS-2930/31/33/34 and the Sanwa 29E31S.

Benimaru
Posts: 29
Joined: October 12th, 2018, 8:23 pm
Location: Germany
eBay: extension55
Initials: PDG

Re: Nanao MS2932-S compatibility

Post by Benimaru » October 21st, 2018, 1:15 pm

Thanks for the clarification! :)

kuze
Posts: 70
Joined: September 29th, 2013, 5:09 pm
Location:

Re: Nanao MS2932-S compatibility

Post by kuze » October 25th, 2018, 2:29 am

Isn't the 2932 the same curvature as 2930/2931/2933/2934?

User avatar
mufunyo
Posts: 673
Joined: August 21st, 2008, 12:26 am
Location: Eindhoven, NL
eBay: mufunyo
Initials: MUF

Re: Nanao MS2932-S compatibility

Post by mufunyo » October 25th, 2018, 2:49 pm

kuze wrote:
October 25th, 2018, 2:29 am
Isn't the 2932 the same curvature as 2930/2931/2933/2934?
No. I made the mistake of assuming that once, and experienced the practical result myself. Bezel doesn't fit and it's visibly curvier.
Image

kuze
Posts: 70
Joined: September 29th, 2013, 5:09 pm
Location:

Re: Nanao MS2932-S compatibility

Post by kuze » October 26th, 2018, 3:22 am

mufunyo wrote:
October 25th, 2018, 2:49 MP
kuze wrote:
October 25th, 2018, 2:29 am
Isn't the 2932 the same curvature as 2930/2931/2933/2934?
No. I made the mistake of assuming that once, and experienced the practical result myself. Bezel doesn't fit and it's visibly curvier.
Interesting, TIL!

User avatar
nem
Posts: 1298
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Nanao MS2932-S compatibility

Post by nem » October 27th, 2018, 1:46 pm

It's curvier and the screen comes out a good bit farther from the frame (maybe half an inch?).

Benimaru
Posts: 29
Joined: October 12th, 2018, 8:23 pm
Location: Germany
eBay: extension55
Initials: PDG

Re: Nanao MS2932-S compatibility

Post by Benimaru » December 21st, 2018, 6:33 am

I've learned recently that there are also different bushings for each type of bezel...
Are the ones for the Nanao any different from the ones for the semi curved screen other than in length?
Which length do they have exactly?

Post Reply