happ controls filler bezel for pure flat tri sync

For monitor related issues
Post Reply
User avatar
grantspain
Tech Head
Posts: 4523
Joined: August 17th, 2008, 4:23 pm
Location: down south

happ controls filler bezel for pure flat tri sync

Post by grantspain » April 16th, 2009, 7:33 pm

sorry i do not remember who asked but the filler bezel for any cab to accept a pure flat crt is happ controls part number 49-1857-00 and should be around $12

thchardcore
Posts: 144
Joined: August 19th, 2008, 8:34 am
Location:

Re: happ controls filler bezel for pure flat tri sync

Post by thchardcore » April 18th, 2009, 9:07 am

Hey grant

I think that was me you were referring to. Can I cut this down in shape and get it to fill? I'm confused on how to use it properly (in regards to modification).

First thing first and actually wire my cable for it. I've had the new monitor for like a week and no progress. It just sits there and if you've had a monitor in your room kicking around, imagine 2. :(

Thanks
15khz upscaled is cheating

User avatar
grantspain
Tech Head
Posts: 4523
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: happ controls filler bezel for pure flat tri sync

Post by grantspain » April 18th, 2009, 12:55 pm

the bezel filler is meant to fit on to the original,i think it sticks on but i am not sure

the conecting of the monitor should be easy,you just need the correct plugs which i believe oxtsu has provided a link for

thchardcore
Posts: 144
Joined: August 19th, 2008, 8:34 am
Location:

Re: happ controls filler bezel for pure flat tri sync

Post by thchardcore » April 19th, 2009, 8:52 am

Yes,
but I am confused on one thing. The hot and neutral (US homie).

I have figure out how to ground it properly, I think.

From the original 15 pin AMP SEGA pinout that went to the nanao: How do I tell the hot from the neutral, there are just 2 black wires?
I also can't tell the difference on the PFX, but I think the hot is the fused line on the chassis.

Last thing, with the degauss, I am going to wire to the original, which had a button installed under the control panel for demag, can I use that or do I just use the one on the monitor control board. I am assuming, both will work.

Thanks
15khz upscaled is cheating

User avatar
grantspain
Tech Head
Posts: 4523
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: happ controls filler bezel for pure flat tri sync

Post by grantspain » April 19th, 2009, 10:53 am

i can only advise more with good detailed photo's
yes normally the hot side is the fused side-here in spain it don't matter as the mains is reversible

are you going to run from a transformer or direct from mains?

thchardcore
Posts: 144
Joined: August 19th, 2008, 8:34 am
Location:

Re: happ controls filler bezel for pure flat tri sync

Post by thchardcore » April 19th, 2009, 10:59 am

from the cabs psu ;)
15khz upscaled is cheating

thchardcore
Posts: 144
Joined: August 19th, 2008, 8:34 am
Location:

Re: happ controls filler bezel for pure flat tri sync

Post by thchardcore » April 20th, 2009, 8:23 am

Okay, finally got this **** wired,was expecting, given my luck, to have some sort of tube damage with degauss from shipping. Modified a nanao connector and finally flipped the switch. All I can say is WOW.

This is so **** nice. Best monitor I've ever seen. :awe:
15khz upscaled is cheating

User avatar
grantspain
Tech Head
Posts: 4523
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: happ controls filler bezel for pure flat tri sync

Post by grantspain » April 20th, 2009, 8:39 am

thchardcore wrote:Okay, finally got this **** wired,was expecting, given my luck, to have some sort of tube damage with degauss from shipping. Modified a nanao connector and finally flipped the switch. All I can say is WOW.

This is so **** nice. Best monitor I've ever seen. :awe:
what about some photos :awe:

thchardcore
Posts: 144
Joined: August 19th, 2008, 8:34 am
Location:

Re: happ controls filler bezel for pure flat tri sync

Post by thchardcore » April 20th, 2009, 9:30 am

Sure thing,not at home,went to the folks to watch the pets. I'll post some nice 15KHZ shots of CPS2 stuff.

Thanks for all your help.
15khz upscaled is cheating

User avatar
Coryoon
Posts: 13
Joined: October 14th, 2008, 1:46 am
Location: Montreal, Qc, Canada

Re: happ controls filler bezel for pure flat tri sync

Post by Coryoon » April 20th, 2009, 11:38 pm

Wow, I'm glad that you finaly got the monitor working Mike ! I can't wait for the 15 khz pics. I didn't tested the 15 khz yet, I'm waiting for the connectors to get there

serantes
Posts: 174
Joined: September 2nd, 2008, 6:27 pm
Location:

Re: happ controls filler bezel for pure flat tri sync

Post by serantes » April 22nd, 2009, 9:48 pm

Grant is it possible to find one of those brezels in Spain ?

User avatar
grantspain
Tech Head
Posts: 4523
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: happ controls filler bezel for pure flat tri sync

Post by grantspain » April 22nd, 2009, 9:50 pm

serantes wrote:Grant is it possible to find one of those brezels in Spain ?
unlikely,you can order from riverservice and they accept paypal so i am told

thchardcore
Posts: 144
Joined: August 19th, 2008, 8:34 am
Location:

Re: happ controls filler bezel for pure flat tri sync

Post by thchardcore » April 22nd, 2009, 9:57 pm

Coryoon wrote:Wow, I'm glad that you finaly got the monitor working Mike ! I can't wait for the 15 khz pics. I didn't tested the 15 khz yet, I'm waiting for the connectors to get there
Pics tonight when I get home from work.

Zero 3
Ghouls n Ghosts
X-men vs Street Fighter
15khz upscaled is cheating

Post Reply