Wei-ya M3129D03-72 Degauss?

For monitor related issues
Post Reply
fubarduck
Posts: 103
Joined: August 23rd, 2008, 8:04 am
Location: Singapore
eBay: fubarduck
Contact:

Wei-ya M3129D03-72 Degauss?

Post by fubarduck » March 5th, 2009, 7:29 pm

Hi there,

One of the Blast Citys I recently acquired has a Wei-ya chassis instead of Sanwa or Nanao. The Monitor Model # is M3129D03-72 and the Chassis Model # is C3129D03.

It is badly in need of a Degauss, but I can not for the life of me find out how to do this. Unfortunately, this cabinet didn't come with a manual for the Wei-ya chassis so I'm a bit lost.

Any help would be appreciated! Sorry for the crap quality pictures.

Image
Image
Image

User avatar
dmauro
Posts: 383
Joined: August 28th, 2008, 4:15 pm
Location: Brooklyn, NY

Re: Wei-ya M3129D03-72 Degauss?

Post by dmauro » March 5th, 2009, 7:43 pm

I have a 3129a and it degausses on start if it's been left off for a while.

User avatar
kernow
:problem: child
Posts: 14854
Joined: August 17th, 2008, 2:01 pm
Location: Devon
Initials: KRN
Contact:

Re: Wei-ya M3129D03-72 Degauss?

Post by kernow » March 5th, 2009, 7:49 pm

Theres a connector on the chassis for a degauss switch usually, one of my AWSD's has an auto deguass, the other is manual with a button (inside the cab).

You could just add a button with a couple wires, says in the manual it is 'optional'

Image
David... The wind blows... The wind blows... Bits of your... life awayee

Post Reply