MS8-29 vs MS9-29

For monitor related issues
Post Reply
User avatar
Posts: 100
Joined: May 20th, 2011, 9:10 pm
Location: Oslo, Norway

MS8-29 vs MS9-29

Post by Jamtex » September 11th, 2014, 11:57 am

I have an MS8-29FSG that has vertical collapse issues and some one offered me a MS9-29T to replace what I have whilst I get parts to fix the MS8.

Are there any major differences between the MS8 and MS9? From reading the various threads it does seem that the MS9 is interchangable with the MS8 but is it really? Are there any diffences between connectors or geometry?

User avatar
Tech Head
Posts: 4498
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: MS8-29 vs MS9-29

Post by grantspain » September 11th, 2014, 9:19 pm

pretty sure the ms9 vertical yoke connector is as smaller gauage than the ms8-which should have a 4 pin(the ms9 has 2 x 2pin connectors)

otherwise the only difference is on the vertical impedance of the deflection yoke but the ms9 should have the adjustment required to negate this

Post Reply