Nanao 2931 wire on chassis

For monitor related issues
Post Reply
300wins
Posts: 52
Joined: March 7th, 2011, 3:21 am
Location: San Jose, CA

Nanao 2931 wire on chassis

Post by 300wins » July 25th, 2011, 1:47 am

So I have a Nanao 2931 chassis that has a wire which I can't figure out where it goes. It does NOT go into the white connector on the right that is open.
It is connected to the 15 pin connector on the chassis (bottom row it seems). Any help is appreciated. Yes, the chassis is the black goop of death and right now, it's dead. I get no picture and all I hear is a clicking noise.
It is the one circled professionally in blue. :palm:
Sorry for the blurry picture of the connector.

Image

User avatar
hedorah
Posts: 101
Joined: April 15th, 2009, 12:19 am
Location: san francisco

Re: Nanao 2931 wire on chassis

Post by hedorah » July 25th, 2011, 5:00 am

Was this the one you bought from Matsu? :(

300wins
Posts: 52
Joined: March 7th, 2011, 3:21 am
Location: San Jose, CA

Re: Nanao 2931 wire on chassis

Post by 300wins » July 25th, 2011, 6:04 am

No, the one I bought from Matsu had a Nanao 2930 chassis (non autosync). I still have it and it works perfectly fine.
This one I got from another seller and shortly after I got it, it got the black goop of death.

hedorah wrote:Was this the one you bought from Matsu? :(

Post Reply