PRE ORDER - REPRO BOX CAVE-AMI / MVS and Label

Arcade cabinets, control panels, joysticks, harnesses...
Topics are pruned after 90 days of inactivity.
Post Reply
User avatar
yaourtland
Posts: 3
Joined: March 13th, 2016, 1:23 pm
Location: Belgium
eBay: yaourt_be

PRE ORDER - REPRO BOX CAVE-AMI / MVS and Label

Post by yaourtland » December 15th, 2019, 7:30 pm

Hi

I'm now collecting funds to make mass order of reproduction boxes of CAVE/AMI and the MVS with label

The price is 19,99 euros for CAVE/AMI box (discount if qty ordered)
The price is 24,99 euros for 5 MVS boxes and 5 labels (discount if qty ordered)

All the info on https://gateninety.com/product-category/crowdfunding/

If link to my website is not allowed, feel free to delete.

Image
Image

User avatar
waiwainl
Posts: 103
Joined: June 27th, 2014, 12:10 pm
Location: Netherlands

Re: PRE ORDER - REPRO BOX CAVE-AMI / MVS and Label

Post by waiwainl » December 15th, 2019, 8:22 pm

Great news, good price, I'm in for at least 5 :awe:

Four questions:

1) Do you have a picture of the inlay carton? (where the PCB is put into)
2) What are the outer dimensions of the box?
3) Do you have somewhere a mark (either with ink or some carton cut) where the box can be identified as repro? (perhaps inside)
4) You mention it will take roughly 6 months to produce after the crowdfunding is completed, can you elaborate why it takes this long? Do you start from scratch with this project? Or is the picture you show above the result of your actual proof of concept?

*edit*

Ah, you answered question 3 already on your website: "the box will be stamped inside with the text “not original” to avoid any confusion" :D

User avatar
thegreathopper
Geese's Bodyguard
Posts: 1325
Joined: August 17th, 2008, 6:56 pm
Location: London
eBay: thegreathopper
Initials: STV

Re: PRE ORDER - REPRO BOX CAVE-AMI / MVS and Label

Post by thegreathopper » December 15th, 2019, 8:42 pm

Question 3, That’s good news, I was worried sick we would be flooded with counterfeit cardboard boxes, Ali needs one! :awe:

User avatar
yaourtland
Posts: 3
Joined: March 13th, 2016, 1:23 pm
Location: Belgium
eBay: yaourt_be

Re: PRE ORDER - REPRO BOX CAVE-AMI / MVS and Label

Post by yaourtland » December 15th, 2019, 9:25 pm

waiwainl wrote:
December 15th, 2019, 8:22 MP
Great news, good price, I'm in for at least 5 :awe:

Four questions:

1) Do you have a picture of the inlay carton? (where the PCB is put into)
2) What are the outer dimensions of the box?
3) Do you have somewhere a mark (either with ink or some carton cut) where the box can be identified as repro? (perhaps inside)
4) You mention it will take roughly 6 months to produce after the crowdfunding is completed, can you elaborate why it takes this long? Do you start from scratch with this project? Or is the picture you show above the result of your actual proof of concept?

*edit*

Ah, you answered question 3 already on your website: "the box will be stamped inside with the text “not original” to avoid any confusion" :D
The pictures are the ones from the sample. I’ve the box in hand. I only announce 6 months (probably less) due to the fact that even if it’s mass order, I’m a little player for the factory. My orders are processed with the lower priority :awe: so, I took the worst case scenario

Let’s go for them now :lol:

User avatar
yaourtland
Posts: 3
Joined: March 13th, 2016, 1:23 pm
Location: Belgium
eBay: yaourt_be

Re: PRE ORDER - REPRO BOX CAVE-AMI / MVS and Label

Post by yaourtland » December 15th, 2019, 9:26 pm

thegreathopper wrote:
December 15th, 2019, 8:42 MP
Question 3, That’s good news, I was worried sick we would be flooded with counterfeit cardboard boxes, Ali needs one! :awe:
Not the purpose to flood with counterfeit boxes sold as original. For sure, no confusion will be possible.

Benimaru
Posts: 51
Joined: October 12th, 2018, 8:23 pm
Location: Germany
eBay: extension55
Initials: PDG

Re: PRE ORDER - REPRO BOX CAVE-AMI / MVS and Label

Post by Benimaru » December 16th, 2019, 1:58 pm

Could you also produce japanese MVS labels for the boxes?

User avatar
waiwainl
Posts: 103
Joined: June 27th, 2014, 12:10 pm
Location: Netherlands

Re: PRE ORDER - REPRO BOX CAVE-AMI / MVS and Label

Post by waiwainl » January 14th, 2020, 10:50 am

How is the funding going to start the production? :awe:

User avatar
OlDirty
Posts: 299
Joined: January 12th, 2015, 8:26 pm
Location: Switzerland

Re: PRE ORDER - REPRO BOX CAVE-AMI / MVS and Label

Post by OlDirty » January 19th, 2020, 10:10 pm

What a pitty the boxes are marked as non original. Maybe that would have stopped people to buy stupid expensiv cardboxes :wtf: . Sorry i dont get that "full kit collector" idea, buy the PCB and play the sh*t out of it. But great you're offering thos repro cardboxes :awe: .

Post Reply