How to force specific controller to be player one?

Arcade cabinet hardware and accessories
Post Reply
User avatar
artik
Posts: 34
Joined: January 30th, 2019, 9:56 am
Location: Paris
eBay: jeff.artik

How to force specific controller to be player one?

Post by artik » February 16th, 2019, 1:10 am

Hi, I'm facing a strange issue with the vewlix I bought. I mounted 2 brook universal fighting boards, one for each player. But I don't know how to force a specific board to be player 1 and the other to be player 2. Sometimes I boot windows 10, and boards are inverted: the previous player 1 is now player 2 and vice et versa. Is there a way to force the attribution of the board instead of random? I tried to set the Joystick windows configuration selecting a controller, and setting it as "default", but doesn't change.

Thanks for help
Last edited by artik on February 21st, 2019, 2:24 am, edited 1 time in total.

User avatar
FrancoB
J+ member of the year finalist!
Posts: 4587
Joined: June 8th, 2009, 10:42 pm
Location: Buckinghamshire
eBay: francosquashking
Initials: FRN

Re: How to force specific brook board to be player one?

Post by FrancoB » February 16th, 2019, 4:56 am

[This] might be of use to you.

User avatar
artik
Posts: 34
Joined: January 30th, 2019, 9:56 am
Location: Paris
eBay: jeff.artik

Re: How to force specific brook board to be player one?

Post by artik » February 21st, 2019, 1:57 am

Thanks franco, after I did his tuto (I easily lost 2hours because of devcon), I found a 2minutes method. Solution posted there ;)

laminus6
Posts: 2
Joined: March 8th, 2019, 2:01 pm
Location: Dubai
eBay: laminus66

Re: How to force specific brook board to be player one?

Post by laminus6 » March 9th, 2019, 5:37 am

artik wrote:
February 21st, 2019, 1:57 am
Thanks franco, after I did his tuto (I easily lost 2hours because of devcon), I found a 2minutes method. Solution posted there ;)
HI Artik I am facing the same issue with my vowlix, can you share the solution to help us?

User avatar
nem
Posts: 1527
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: How to force specific brook board to be player one?

Post by nem » March 9th, 2019, 12:58 pm

laminus6 wrote:
March 9th, 2019, 5:37 am
HI Artik I am facing the same issue with my vowlix, can you share the solution to help us?

The link is in FrancoB's post:

FrancoB wrote:
February 16th, 2019, 4:56 am
[This] might be of use to you.

User avatar
artik
Posts: 34
Joined: January 30th, 2019, 9:56 am
Location: Paris
eBay: jeff.artik

Re: How to force specific controller to be player one?

Post by artik » March 9th, 2019, 3:31 pm

HI laminus6. Yes, solution and easier method posted there. But I'm facing a new issue: When I connect a Xbox controller, it becomes player1! What a mess seriously... Anybody have the solution ?

Post Reply