Page 1 of 1

Naomi Driver POT pinouts

Posted: October 31st, 2014, 2:06 pm
by silverfox0786
hi can anyone advise me how to wire up a pot for a Naomi driver wheel

I need to know where the 3 pins on the pot go to on the IO please

that goes for the wheel and the brake and accelerator

thanks

Re: Naomi Driver POT pinouts

Posted: November 2nd, 2014, 4:12 pm
by codecrank
refer to pinout http://triplemoonstar.brinkster.net/the ... ockid=1718"

the 5k pots are from left to right vcc,AD,gnd , if you invert the order the direction will be reversed so its obvious to figure out. i'd guess the wheel is AD0, and so on...

Re: Naomi Driver POT pinouts

Posted: November 3rd, 2014, 9:38 am
by silverfox0786
that just what I needed thanks