Naomi Driver POT pinouts

Arcade cabinet hardware and accessories
Post Reply
silverfox0786
Posts: 11
Joined: February 9th, 2014, 3:21 pm
Location:
eBay: silverfox0786
Contact:

Naomi Driver POT pinouts

Post by silverfox0786 » October 31st, 2014, 2:06 pm

hi can anyone advise me how to wire up a pot for a Naomi driver wheel

I need to know where the 3 pins on the pot go to on the IO please

that goes for the wheel and the brake and accelerator

thanks

User avatar
codecrank
Posts: 466
Joined: January 9th, 2011, 7:32 pm
Location: NSA Central

Re: Naomi Driver POT pinouts

Post by codecrank » November 2nd, 2014, 4:12 pm

refer to pinout http://triplemoonstar.brinkster.net/the ... ockid=1718"

the 5k pots are from left to right vcc,AD,gnd , if you invert the order the direction will be reversed so its obvious to figure out. i'd guess the wheel is AD0, and so on...

silverfox0786
Posts: 11
Joined: February 9th, 2014, 3:21 pm
Location:
eBay: silverfox0786
Contact:

Re: Naomi Driver POT pinouts

Post by silverfox0786 » November 3rd, 2014, 9:38 am

that just what I needed thanks

Post Reply