All about locks

Arcade cabinet hardware and accessories
zumbito
Posts: 652
Joined: February 18th, 2015, 12:03 am
Location: Metro City
eBay: jaime5171

Re: All about locks

Post by zumbito »

DanielGabassi wrote:Hi guys!

I'm refurbishing a New Astro City cabinet. At this moment, the only thing missing is the lock/tongue kit.
Just found a user here at the forum that have a NAC tongue reproduction kit. Now I'm looking for the locks for that kit and just found these:

http://www.arcadespareparts.com/newslet ... 12_68.html"

Do you guys know, which lock is the correct for a NAC cabinet? They have 16mm, 20mm, 25mm, and 30mm measurements and say that all fits NAC. Witch one is the right match?

Thanks!
I am in the same situation here. New astro, blast and new net, and some of the locks won´t open. I will need to drill and buy new ones, but not sure which one to install, as I don´t know the depth, the diameter or how big the latch is.

I´m certain that some of them are Sega locks and would prefer not to drill them. In that case, is there any way to take them out? If two of them have the same number xxxx, does that mean any key with that number xxxx will open them both? Just in case I am lucky and can make copies of the keys and use the SEGA locks.
User avatar
hikaru
Posts: 72
Joined: December 31st, 2014, 2:34 pm
Location: japan

Re: All about locks

Post by hikaru »

who has a Jaleco Pony Mark II or III
I'm looking for the master key number
thank you
User avatar
zak
Posts: 1242
Joined: October 19th, 2014, 1:35 pm
Location: UK
eBay: NA

Re: All about locks

Post by zak »

Looking for Capcom cute locks. Can anyone help? :thumbup:
User avatar
hikaru
Posts: 72
Joined: December 31st, 2014, 2:34 pm
Location: japan

Re: All about locks

Post by hikaru »

FIRST G 7758 ;)
User avatar
matt5cott
Posts: 214
Joined: August 18th, 2008, 12:18 pm
Location: Nottinghamshire
eBay: matt5cott
Initials: MAT
Contact:

Re: All about locks

Post by matt5cott »

Paulie wrote:
August 27th, 2014, 10:52 pm
Great idea and I know it will be really useful too/

Here's a list of the lock and tang numbers for a UK Sega Naomi (dunno if US or JPN NC/NNC's are different)

Control panel bucket - 220-5575UK - Lock
Control panel bucket - HOT-1505UK - LKG TNG

Service door - 220-5575UK - Lock
Service door - DP-1167UK - TNG LKG UK

Rear hatch - 220-5575UK - Lock
Rear hatch - NOA 1115UK - TNG Rear Hatch

Cash box door - 220-5574UK - Lock (keyed different)
Cash box door - HOT-1203XUK - Center TNG
Cash box door - HOT-1204X - Side TNG
Cash box door - 065- E00300 - E ring 3mm

My cab had locks but no keys so I ended up using the original tangs combined with STG locks from Craig
http://www.giz10p.co.uk/index.php?_a=vi ... ductId=189"
Trying to source a set of locks for my NNC, 5575/5574 but not having much luck outside of bonkers asking prices on eBay, giz10p not doing locks now either.
ImageImage twitter - MilkmanHeroImage
User avatar
aerobert
Posts: 89
Joined: June 15th, 2018, 12:37 pm
Location: Sweden
eBay: romajoh

Re: All about locks

Post by aerobert »

So anyone know what generic cam lock fits the blast city panels? I've given up looking for 5575 locks, went to a local hardware store and bought a set of cheapo locks but they are 18,7mm diameter and all holes for the Blast seem to be 16mm.

Can't find any 16mm diameter online. Any hints?
User avatar
phillv85
Posts: 289
Joined: March 16th, 2013, 9:16 pm
Location:
eBay: phillv85
Initials: PAV

Re: All about locks

Post by phillv85 »

Not my auction, but there's a set on Ebay right now ending tomorrow:

https://www.ebay.co.uk/itm/Sega-5575-Or ... Sw7kRfVntd
User avatar
aerobert
Posts: 89
Joined: June 15th, 2018, 12:37 pm
Location: Sweden
eBay: romajoh

Re: All about locks

Post by aerobert »

No tangs, useless without them I suppose?
Post Reply