Toaplan (Batsugun) on Xrgb

PCB problems and fixes
Post Reply
thchardcore
Posts: 143
Joined: August 19th, 2008, 8:34 am
Location:

Toaplan (Batsugun) on Xrgb

Post by thchardcore » March 31st, 2019, 5:43 pm

Hi,

Using Batsugun on my micomsoft xrgb-1 or displ causes the top part of the screen to bend like there is an AFC issue. Has anyone else experienced this issue with Toaplan hardware before? My Tatsujin Oh and Battle Garegga are fine with the same setup. Wondering if it is an issue with the board itself.
15khz upscaled is cheating

User avatar
zak
Posts: 893
Joined: October 19th, 2014, 1:35 pm
Location: UK
eBay: NA

Re: Toaplan (Batsugun) on Xrgb

Post by zak » April 1st, 2019, 3:49 pm

I think system11 and I also noticed this with Toaplan PCBs on cabinets too, albeit, not that bad on a cabinet monitor.

Is it the top left right?

thchardcore
Posts: 143
Joined: August 19th, 2008, 8:34 am
Location:

Re: Toaplan (Batsugun) on Xrgb

Post by thchardcore » April 2nd, 2019, 8:17 am

If monitor is horizontal, it is the top of screen skewed to the left. In Tate, the left side skewed down.
15khz upscaled is cheating

Post Reply