Naomi 1/2 Case Fan replacement.

PCB problems and fixes
Post Reply
User avatar
Andypc
Posts: 337
Joined: November 9th, 2008, 11:30 pm
Location: Ilford, Essex
eBay: Andyapc
Initials: APC

Naomi 1/2 Case Fan replacement.

Post by Andypc » October 5th, 2014, 6:45 pm

The case fan in both my Naomi 1 and Naomi 2 are getting very loud and need replacing. Does anyone know of a good replacement and where it's available. I have looked for the original ones mentioned in the wiki, but can't find them anywhere.
“You can have it any colour you want, so long as it’s black.” Henry Ford
Wanted:- Tehkan World Cup cab

User avatar
Spectre
By Spectre
Posts: 1764
Joined: January 22nd, 2009, 5:42 pm
Location: Suffolk, UK
eBay: spectre-uk
Initials: JIM

Re: Naomi 1/2 Case Fan replacement.

Post by Spectre » October 6th, 2014, 1:45 pm

Andypc wrote:The case fan in both my Naomi 1 and Naomi 2 are getting very loud and need replacing. Does anyone know of a good replacement and where it's available. I have looked for the original ones mentioned in the wiki, but can't find them anywhere.
eBay is your friend. You should be able to find some general use pc fans the same dimensions from sellers in China etc. I've replaced a few CPS2 A board fans this way (just chop and reattach the original connector).

User avatar
Andypc
Posts: 337
Joined: November 9th, 2008, 11:30 pm
Location: Ilford, Essex
eBay: Andyapc
Initials: APC

Re: Naomi 1/2 Case Fan replacement.

Post by Andypc » October 6th, 2014, 4:24 pm

You have to be careful with the Naomi as a lot of the cheaper fans pass far less air through than the originals 16cu.ft/min.
“You can have it any colour you want, so long as it’s black.” Henry Ford
Wanted:- Tehkan World Cup cab

justniz
Posts: 4
Joined: December 5th, 2014, 2:35 am
Location:

Re: Naomi 1/2 Case Fan replacement.

Post by justniz » December 9th, 2014, 6:46 pm

I believe the pabst 612 fan is what you need.

Mouser has them:
http://www.mouser.com/ProductDetail/ebm ... U8XA%3D%3D"

Post Reply