Supergun CGA to VGA synch problems

Everything Supergun related
Post Reply
zumbito
Posts: 644
Joined: February 18th, 2015, 12:03 am
Location: Metro City
eBay: jaime5171

Supergun CGA to VGA synch problems

Post by zumbito »

Hi,

I am trying to build myself a test rig, and purchased a CGA to VGA board to connect the supergun to a LCD, problem is image is flickering and don't really know why:

https://www.hasntfiguredouthowtoembedyoutubeproperly.com/watch?v=IvoSY3TtXwc


I thought it might be the synch cable, I tried to solder a potentiometer to play with it, but still no progress (I am not really sure if I installed it correctly... :oops: )

Any ideas?
zumbito
Posts: 644
Joined: February 18th, 2015, 12:03 am
Location: Metro City
eBay: jaime5171

Re: Supergun CGA to VGA synch problems

Post by zumbito »

Ok, solved. In case anyone has the same issue, problem was I was powering the CGA to VGA with a different PSU. The moment I just connected it to the Jamma harness, flickering went away. :D
Post Reply